Blinds and shades are considered as the window treatments that can offer privacy and control light, as well as improve the interior design. In the course of time, they may have problems like broken slats, entangled cords or bad mechanisms. However, a large number of these issues are solvable instead of requiring replacement.
Helpful suggestions for the repair of shades and blinds
Fixing broken slats
Blind slats can quickly develop faults due to force or even break due to time. If one of the slats is broken, the blind does not have to be replaced; the damaged one can be replaced. To repair it, lift the bottom cap, remove the ruined slat, and place a new one. Secure all the items back and ensure the slats are correctly positioned.
Repairing tangled or stuck cords
Corded blinds have some disadvantages: If the cords are not adjusted for some time, they may twist and get stuck. To rectify this, ensure that the cord is not twisted or trapped in the device’s mechanism. In this case, you need to ensure that the cord is unwound gently and that it can slide easily. If the cord is frayed or broken, it needs to be replaced by pulling a new one through the blind’s pulley system.
Fixing a stuck roller shade
Roller shades may fail to roll up or down because of a loss of tension or dust accumulation. One should pull the shade down to its lowest position before slowly raising it while applying slight pressure to correct this. If the problem still remains, then uninstall the shade and clean the roller assembly. It is also possible to lubricate by adding more light oil to the system to increase the movements.
Replacing broken chains or cords
In case the chain or cord of a blind becomes ineffective, it can be replaced by another one. Buy a new cord or chain the same size as the first one purchased. Insert the new piece through the mechanism gently to align it to the position of the old piece. After that, it is recommended to test the blind to ensure it can move as it should and fasten everything.
Reattaching loose mounting brackets
Eventually, screws in the brackets used to hold blinds may become loose, resulting in the blinds hanging or drooping down. Screw the brackets by further turning them until they are firmly fixed in position. If the screws are damaged, then you should use the wall anchors so that they can fit tightly onto the wall. In the case of heavy blinds, it is advisable to install extra support brackets so that one does not have to deal with the problems in the future.
Maintaining shades and blinds
Proper maintenance is essential for increasing the durability of shades and blinds near me. Sweep them often with a microfiber cloth or vacuum them with a brush surface attachment. For fabric shades, spot clean stains with mild soap and water. Do not use strong chemicals, which may destroy the materials.
Summary
Shades and blinds should be repaired to avoid the need to replace them, which is expensive. Some of the repairs that can be made are changing slats, untangling cords and adjusting mechanisms, which do not require complex tools